Skip to content

FRONIUS TRANSPOCKET 180 DC TIG SITE

£1,499.00

FRONIUS TRANSPOCKET 180 DC TIG MMA INVERTER 200V SITE PACKAGE

TTG1600A TIG Torch And Site Box Including MMA leads and Earth Cable

ONLINE OFFER!

The NEW generation of TransPocket 150 and TransPocket 180 devices
 
The goal while developing the new generation of TransPocket 150/180 devices was simple: to make the good better. Thanks to a fully digitised and intelligent resonance system, the control response has been improved, leading to better ignition, less spatter and a highly stable arc.
Furthermore, optimised housing has made the unit more robust than ever.

LIGHT & PORTABLE
  • Only 19.6 lbs (8.9 kg)
  • Carrying strap included

 FEATURES

Anti-Stick - for safe removal by the operator of a stuck stick electrode to the workpiece

The TP 180 includes operating modes designed specifically for Basic, Rutile and Cellulose. The maximum electrode diameter size is 5/32” / Hot Start and Soft Start function makes it easier to ignite cellulose 6010 and basic 7018

RUGGED DESIGN

  • High impact resistance
  • Integrated dust filter
  • Raised feet prevent water penetration
  • Designed for rough environments
  • IP23 rated

DESIGNED WITH THE FUTURE IN MIND/ The new device generation is ready for future innovations. New software versions, special processes and system information can easily be applied or updated.

MAXIMUM EFFICIENCY

The new TransPocket series stands for maximum energy efficiency along with lower energy consumption meaning lower energy costs./ PFC (Power Factor Correction), enables the use of extremely long power leads with lower losses and improved generator compatibility. This massively expands the operating radius for the welder./ Time ShutDown function (TSD), switches off the power supply after a user-specified time window, saving energy. This leads to the most energy-efficient use of the device. 

SOFT START

The soft-start function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes

ANTI-STICK

If a short circuit occurs that causes the electrode to stick during MMA welding, the power source is switched off immediately. This prevents the electrode from burning out.

HOT START

To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.

SPECIFICATION
Manufacturer Fronius
Part No. 4,075,215,850
Welding current / Duty cycle 160A / 60%
Mains voltage 230V
Mains fuse 16A
Dimension / b 130mm
Dimension / l 425mm
Weight 8.8 kg
Download Fronius Magicwave Specification Download
.add-to-cart__price span.money { font-size: 20px; }