1000s of products

Service + Calibration

Technical Support

Workhorse Petrol Air Compressor 5.5hp 500l

Workhorse Petrol Air Compressor 5.5hp 500l

$1,654.00
Skip to product information
Workhorse Petrol Air Compressor 5.5hp 500l

Workhorse Petrol Air Compressor 5.5hp 500l

$1,654.00
Shipping calculated at checkout.

The Workhorse Petrol Air Compressor 5.5hp 500l is a static, belt-driven petrol compressor designed to provide dependable air supply in workshops without easy access to mains power, ideal for bodyshops, mobile repair and general industrial use.

Key Features

  • 5.5 hp petrol drive
  • Large 500 litre receiver
  • Belt driven cast iron pump
  • Twin cylinder, slow running
  • Suitable for workshop air tools
  • Professional bodyshop duty build
Technical Support

Everything we sell is supported by our factory trained engineers at our premesis in Manchester or nationwide through our mobile service engineers.

Delivery + Returns

Returns details can be edited in the theme editor.

Supply voltage

Supply

230V

Warranty

Warranty

2 Years

Free delivery

Free Delivery

UK mainland delivery

Service engineers

Service

In-house engineers

Technical support

Support

0161 223 1843

Expert Advice

Paul Jones

Paul Jones says

A 5.5 hp petrol, large‑receiver compressor like this is aimed at workshops that need serious air capacity where mains power is limited or non‑existent. In practice, it suits mobile body repair, on‑site spraying, or running larger air tools on yards and remote jobs.

In day-to-day use, I’d expect it to sit on a van or in a corner of the shop feeding hose reels, DA sanders, blow guns and perhaps smaller spray guns. The petrol drive gives you flexibility, but it also means exhaust fumes and noise, so positioning and ventilation matter.

Two key points: match the free air delivery to your heaviest continuous load, and make sure the receiver size and duty cycle suit how often you’re on the tools, not just the headline horsepower. Also pay attention to fuel quality and regular oil checks – petrol compressors get neglected more than fixed electrics.

A common issue I see is undersized hose and poor quick connectors choking the system. Set it up correctly, service it on schedule, and this type of unit is a reliable workhorse for serious workshop air demand.

Paul Jones, Technical Director

WHY BUY YOUR EQUIPMENT FROM US?

At BWS, we do more than supply equipment. Our experienced engineers work with the products we sell every day, providing practical advice to help you choose the right equipment for your workshop.

From installation and training to servicing, calibration and repairs, we’re here to support you long after your purchase. You’re not simply buying a machine — you’re gaining access to a team that understands how to keep it working.

See What We Do!

Technical Features

  • 5 hp petroldriven compressor providing independent air supply where no mains electricity is available
  • Large 500 litre air receiver giving a substantial air reserve for highdemand tools and spray equipment
  • Beltdriven cast iron twincylinder pump for reliable duty use and good longevity in professional workshops
  • Slowrunning pump with aerodynamic flywheel and aftercooler design (as per Workhorse petrol range) to reduce noise and improve cooling performance
  • Automatic stop/start control to maintain receiver pressure without constant manual intervention
  • Static installation capability for fixed workshop use where a large air bank is required for multiple air outlets
  • Option to configure for mobile use, allowing the compressor to be relocated around larger sites or shared between bays
  • Designed to run typical bodyshop air tools such as impact wrenches, sanders, grinders and spray guns on petrol power
  • Receiver and build based on Workhorse/Fiac industrial range, constructed to current European compressed air vessel standards
  • Heavyduty layout suited to continuous trade use in bodyshops and fabrication shops rather than light DIY applications
  • Large receiver volume helps reduce compressor cycling frequency and gives more stable pressure during sustained air draw
  • Supplied through BWS with engineeringled technical support, including correct setup advice, installation guidance and ongoing service
  • Compatible with genuine air treatment and filtration equipment to protect downstream tools and paint finishes
  • Suitable for use as a standby or backup air source if the main 400 V workshop compressor is offline or overloaded
  • Petrol format useful for remote work, accident repair away from fixed bays, and jobs where hose runs from a static compressor would be impractical

Specification

Motor Power
5.5hp
Drive Type
Petrol engine, belt driven
Engine Type
Honda petrol engine
Air Receiver Capacity
500 litres
Compressor Type
Piston, twin cylinder pump
Maximum Pressure
145 PSI
Pump Construction
Cast iron cylinder block
Application
Professional bodyshop and workshop air tools
Installation Options
Static or mobile use
Outlet Connection
1
Warranty
2 year conditional warranty (subject to registration, terms and conditions)
Engine Warranty
3 year Honda engine warranty
Compliance
Air receiver built to European Standard 09

FAQs

Is the Workhorse Petrol Air Compressor 5.5hp 500l suitable for professional bodyshops and workshops?
Yes, it is designed for demanding professional use where a large air reserve and reliable duty cycle are needed. The 5.5hp petrol drive unit with a belt-driven cast iron pump and 500 litre receiver makes it well suited to running typical bodyshop air tools, general workshop air equipment and supporting multiple users, especially where mains power is limited or unavailable.
What sort of air tools and applications will a 5.5hp 500 litre petrol compressor comfortably run?
A correctly set up 5.5hp petrol compressor with a large 500 litre receiver will comfortably support most common workshop tools such as impact wrenches, air ratchets, blow guns, tyre inflators and many bodyshop spray and preparation tools, provided they are within the compressor’s free air delivery rating. The large tank helps smooth demand and cope with short bursts of higher air usage, which is useful for panel beating and general repair work.
Does this compressor need an electrical supply and how mobile is it?
Being petrol-driven, it does not rely on a fixed electrical supply for the main drive, which makes it suitable for sites, yards or workshops where power is limited or three-phase is not available. The unit is intended for static installation or mobile use depending on how it is mounted, so it can be set up permanently in a plant room or moved around larger premises or between jobs when required.
What should I consider for installation, maintenance and support in a busy workshop?
Install the compressor on a level, ventilated area with adequate access around the 500 litre receiver and pump for inspection, draining condensate and routine servicing. Regular oil checks, belt tension checks and receiver drain-down are important to keep a petrol, belt-driven cast iron pump in good condition. As a Workhorse unit, it is backed by BWS technical support, so our engineers can advise on correct sizing for your air demand, installation layout, and provide ongoing service and repair to keep it reliable in daily professional use.