1000s of products

Service + Calibration

Technical Support

Sealey Mini Mig Welder 130a 230v

Sealey Mini Mig Welder 130a 230v

£250.00
Skip to product information
Sealey Mini Mig Welder 130a 230v
  • Sealey Mini Mig Welder 130a 230v
  • Sealey Mini Mig Welder 130a 230v
Sealey Mini Mig Welder 130a 230v

Sealey Mini Mig Welder 130a 230v

£250.00
Shipping calculated at checkout.

SEALEY MINI MIG WELDER 130A 230V is a compact gas or gasless MIG welder for professional workshop fabrication, vehicle repair and general maintenance.

Key Features

  • 30–130A welding current
  • Heavy-duty high-output transformer
  • Forced-air transformer cooling
  • Gas and gasless operation
  • Two-metre non-live torch
  • Compact portable workshop design
Technical Support

Everything we sell is supported by our factory trained engineers at our premesis in Manchester or nationwide through our mobile service engineers.

Delivery + Returns

Returns details can be edited in the theme editor.
Service engineers

Service

In-house engineers

Technical support

Support

0161 223 1843

Expert Advice

Paul Jones

Paul Jones says

This is a compact 130A MIG welder intended for general fabrication, maintenance and lighter vehicle repair work. I would use it for mild-steel brackets, panels, small repairs and workshop fabrication where a portable 230V machine is more practical than a larger industrial unit.

It can be operated with shielding gas or flux-cored wire by changing the polarity, giving useful flexibility for indoor and outdoor work. With a 30–130A range and forced-air cooling, it is suited to thinner and medium-gauge steel, but the duty cycle must be respected, particularly at higher current. The standard 13A supply is adequate for lighter work; sustained maximum output may require a correctly installed higher-rated supply, subject to an electrician’s assessment.

A common issue with small MIG machines is poor weld quality caused by incorrect polarity, unsuitable wire, inadequate earth connection or contaminated steel. Set the wire size, feed tension, gas flow and torch distance carefully before judging the machine. Used within its duty cycle and maintained properly, it is a dependable workshop welder for controlled repair and fabrication work.

Paul Jones, Technical Director

WHY BUY YOUR EQUIPMENT FROM US?

At BWS, we do more than supply equipment. Our experienced engineers work with the products we sell every day, providing practical advice to help you choose the right equipment for your workshop.

From installation and training to servicing, calibration and repairs, we’re here to support you long after your purchase. You’re not simply buying a machine — you’re gaining access to a team that understands how to keep it working.

See What We Do!

Technical Features

  • Heavyduty highoutput transformer provides adjustable welding current from 30–130A for general workshop and bodyshop welding work.
  • Forcedair cooling helps control transformer temperature and supports a longer duty cycle during repeated welding.
  • Gas and gasless operation allows use with CO2, Argon or CO2/Argon mix, with polarity changed for gasless fluxcored wire.
  • Supplied set up for gasless welding, allowing work without a shieldinggas bottle when used with suitable fluxcored wire.
  • Nonlive 2m torch helps prevent accidental arc strikes when the trigger is not operated.
  • Contoured torch grip improves control and steadiness when laying weld beads.
  • Suitable for wire reels from 0.7–5kg, giving flexibility for different workshop consumable requirements.
  • Includes a mini gas regulator, wire spool, 1m gas hose, earth cable, hose clamps and contact tip.
  • Compact wheeled cabinet is practical for moving between repair bays and small workshop areas.
  • 13A 230V supply suits standard UK workshop power outlets.
  • Thermal protection and an overload indicator help protect the welder during excessive loading.
  • Simple rotary controls provide straightforward adjustment for practical MIG welding setup.
  • Suitable for welding with CO2, Argon or mixed CO2/Argon shielding gas.
  • Transformer is covered by a lifetime guarantee, with a threeyear product guarantee.

Specification

Welding Current
30–130A
Wire Capacity
0.7–5kg
Duty Cycle
100% at 30A, 60% at 45A, 40% at 65A, 20% at 80A
Cooling System
Forced air
Spot Welding Timer
No
Gas Type
CO2, Argon, CO2
Torch
2m non-live
Supply
230V-13A
Absorbed Power
2.8kW
Case Size
Compact
Nett Weight
20kg
Wire Diameter
0.6mm and 0.8mm contact tips
Maximum Supply
32A supply may be required for maximum power

FAQs

What welding range does the Sealey SUPERMIG130 provide?
It provides a 30–130A welding current range, making it suitable for general workshop fabrication, maintenance work and lighter automotive repairs. The forced-air cooling system helps manage transformer heat during use.
Can it be used with gas and gasless MIG wire?
Yes. It can be used in gas or gasless mode. Gasless welding requires flux-cored wire, while gas operation is suitable with CO2, argon or a CO2/argon mix. Changing between gas and gasless operation requires the polarity to be changed.
What power supply does the SUPERMIG130 need?
It runs from a 230V supply and is supplied with a 13A plug. Its absorbed power is rated at 2.8kW; a 32A supply may be required to achieve maximum output, so check the workshop circuit before fitting it for regular high-current work.
What is included and what wire will it accept?
The package includes a 2m non-live torch, mini gas regulator, spool of wire, gas hose, earth cable, hose clamp, gas cup and 0.6mm and 0.8mm contact tips. It accepts wire reels from 0.7kg to 5kg. For aluminium work, use argon, 0.8mm aluminium wire and a suitable 0.8mm contact tip.