1000s of products

Service + Calibration

Technical Support

Telwin Battery Puller

Telwin Battery Puller

£895.00
£895.00
Skip to product information
Telwin Battery Puller
  • Telwin Battery Puller
  • Telwin Battery Puller side view
  • Telwin Battery Puller Up view
  • Telwin Battery Puller
  • Telwin Battery Puller side view
  • Telwin Battery Puller Up view
Telwin Battery Puller

Telwin Battery Puller

£895.00
£895.00
Shipping calculated at checkout.

TELWIN 828130 BATTERY PULLER is a professional workshop tool for controlled battery removal and handling during vehicle repair and servicing.

Key Features

  • Workshop-grade battery handling aid
  • Suitable for professional servicing
  • Helps control heavy batteries
  • Improves removal safety
  • Reduces strain during lifting
  • Practical for daily use
Technical Support

Everything we sell is supported by our factory trained engineers at our premesis in Manchester or nationwide through our mobile service engineers.

Delivery + Returns

Returns details can be edited in the theme editor.
Warranty

Warranty

1 Year

Service engineers

Service

In-house engineers

Technical support

Support

0161 223 1843

Technical Features

  • Batterypowered dent puller gives full portability around the bodyshop or outside the bay with no trailing leads or need for a mains supply.
  • Integrated Liion battery provides consistent output and long runtime, with rapid recharge via the supplied charger to keep the tool in service all day.
  • Welds and pulls in a single action so you can tack the pull tab and draw the dent immediately, speeding up panel work on light to medium damage.
  • Builtin slide hammer mass gives a controlled pulling action directly on the weld point, allowing progressive straightening rather than sudden shock loads on the panel.
  • Suitable for fast repair of a wide range of steel panel dents on doors, wings, quarter panels and similar areas where rear access is limited.
  • Compact, wellbalanced body allows use in tight areas such as lower door skins, sill sections and wheelarches where larger pull systems are awkward.
  • Softgrip ergonomic handle improves comfort and control during repetitive pulling, reducing operator fatigue on longer repair runs.
  • Simple trigger operation with clear on/off control makes the tool easy to pick up and use for any competent panel technician with minimal familiarisation.
  • Supplied in a robust plastic case to protect the tool, battery and accessories in the workshop and during mobile use.
  • Battery and charger included as standard so the system is ready to work straight out of the box without needing additional power packs.
Bodyshop Equipment Engineers

WHY BUY YOUR EQUIPMENT FROM US?

Our team of welding experts at BWS is ready to assist you every step of the way. Whether you have questions about specific products, need guidance on selecting the right equipment, or seek welding-related advice, our knowledgeable staff is here to help.

We also have some of the most experienced engineers in the industry who are able to offer full technical support on top of what the manufacturers offer.

Find Our More

Specification

Manufacturer
Telwin
SKU
828130
Supply
100-230v 1ph
Battery usage
4-5 hrs
Max Amps
2800A
Dimensions
502x87x229mm

FAQs

What type of dents and materials is the Telwin 828130 Battery Dent Puller suitable for?
It is designed for pulling steel bodywork dents where you would normally use traditional dent studs or washers. It welds the pulling tip to bare steel and pulls in one action using the built‑in slide hammer, so it’s ideal for outer panels, sills and general body straightening. It is not for aluminium or high‑strength steel where manufacturer procedures specify different repair methods, so always follow OEM guidelines.
What is included with the Telwin 828130 Battery Dent Puller as supplied by BWS?
The kit is supplied as a self‑contained battery dent puller in a plastic carry case, complete with lithium‑ion battery and charger. You get the handpiece with integrated slide hammer and the accessories needed for standard steel dent pulling. If you need additional consumables or accessories for specific repair methods, our engineers can advise suitable options.
How long does the battery last in typical bodyshop use and how is it charged?
The lithium‑ion battery is designed for intermittent workshop use, giving multiple weld‑and‑pull cycles per charge in normal panel repair work. Actual runtime depends on how frequently you are triggering welds and the size of the dents being pulled. The included charger is simply plugged into a standard mains socket and will recharge the battery between jobs or over a break, so keeping a charge rotation routine in the workshop is usually sufficient without needing a spare battery for most users.
Is the Telwin 828130 Battery Dent Puller suitable for mobile and SMART repair work?
Yes. Its compact, cordless design and integral slide hammer make it well suited to mobile bodywork and SMART repair where mains power is not always available. The plastic case protects the tool in the van, and there are no separate power cables or control boxes to set up. For mobile use, we recommend keeping the battery topped up between jobs and carrying the charger so you can recharge at the customer site if a mains socket is available.
Top brands with nationwide engineers
📞 0161 223 1843 ✉️ sales@basicwelding.co.uk
Contact Us