1000s of products

Service + Calibration

Technical Support

Power Tec Mini Plastic Repair Welder

Name: Power Tec Mini Plastic Repair Welder
Brand: Power-TEC
SKU: 92517
Price: 1362.56 GBP
Availability: InStock

£1,362.56

Shipping calculated at checkout.

Mini Plastic Repair Welder is a compact professional tool for controlled filler welding of automotive plastics using compressed air or nitrogen.

Key Features

Compatible with most automotive plastics
Compact Mini Plastic Repair Welder
Mini Plastic Repair Welder
Controls heating for filler welding
Supplied with roller for finishing
Made in Italy exclusively for Power-TEC

Everything we sell is supported by our factory trained engineers at our premesis in Manchester or nationwide through our mobile service engineers.

Returns details can be edited in the theme editor.

Supply

230V - 16 A 50 / 60Hz

Warranty

12 months

Free Delivery

UK mainland delivery

Service

In-house engineers

Support

0161 223 1843

Expert Advice

Jason says

This is a mini plastic repair welder intended for routine bodyshop repairs to bumpers, trims and similar thermoplastic components. I’m Jason Bowes, Sales Director, and in workshop use it’s employed to melt and deposit filler strips to close cuts, rebuild missing tabs or form internal supports before finishing. Key technical considerations are material compatibility and supply connections: the kit’s filler strips are polypropylene and you must verify the substrate marking before repair, and the unit runs from 230V mains and needs a compressed air or nitrogen supply at the specified inlet pressure and flow. Control and technique matter too — the gun is pre‑calibrated, keep the nozzle off the part (about 1.5 cm), work at the recommended angle and follow the heat‑down routine (turn heat off, wait 5–7 minutes before stopping airflow). In practice I see failures from using the wrong filler or holding the gun too close, which scorches edges or gives poor penetration. Used to its limits and with correct material matching, it gives reliable, repeatable repair work.

Jason, Sales Director

WHY BUY YOUR EQUIPMENT FROM US?

Our team of welding experts at BWS is ready to assist you every step of the way. Whether you have questions about specific products, need guidance on selecting the right equipment, or seek welding-related advice, our knowledgeable staff is here to help.

We also have some of the most experienced engineers in the industry who are able to offer full technical support on top of what the manufacturers offer.

Find Our More

Technical Features

Compatible with almost every plastic type used in the automotive industry.
Can be operated with compressed air or nitrogen.
Compact, entry‑level plastic welder designed for professional workshop use.
Allows welding of filler material by heating the filler with a directed gas flow.
Supplied with a roller to compress and smooth welds and help finish repairs.
Pre‑calibrated at manufacture so no user temperature regulation is required.
Simple two‑button control: general start and illuminated HEAT button to start the hot gas flow.
Gun with nozzle delivers hot gas; procedure requires HEAT off then 5–7 minutes cooling before switching main power off to protect the gun assembly as per manual guidance."""Removed extra quotes""".

Specification

Brand

Power-TEC

Manufacturer

MWM srl

Model

MINI PLASTIC WELDER

MPN

92517

SKU

92517

Type

Plastic welder

Input Voltage

230V - 16 A 50 / 60Hz

Intake Power

210W

Air Flow

15 - 20 l / min

Compressed Air Inlet Pressure

6 - 8 bar (87 - 114 Psi)

Gas

Compressed air, Nitrogen

Power Plug

Standard BS plug

Standards

CE, UKCA

Country of Origin

Italy

Packaged Width (mm)

290

Packaged Height (mm)

275

Packaged Depth (mm)

390

Weight

4.797kg

Number of pieces

3

Warranty

12 months

FAQs

What plastic types can the Mini Plastic Repair Welder repair?

It is suitable for almost every plastic type used in the automotive industry. Many parts are marked with a material code; always check the part marking before repair. The filler strips supplied with the unit are polypropylene (PP) and the manual notes around 80% of automotive plastics are PP, so match filler material to the part to be repaired or contact Power‑TEC if a different filler type or profile is required.

What gas and air supply does it need?

The unit can be used with compressed air or nitrogen. Technical data specifies compressed air inlet pressure 6–8 bar (87–114 psi) with an air flow of about 15–20 l/min. Use the correct pressure and ensure a clean, dry supply as per the manual.

What are the electrical requirements and how should I shut the machine down?

Input voltage is 230V – 16 A 50/60 Hz; intake power is 210W and it is supplied with a standard BS plug. The machine is supplied pre‑calibrated and reaches welding temperature within a few minutes after pressing the heat button. To shut down: turn off the HEAT button, wait for the nozzle air to cool (about 5–7 minutes), then turn off the main power switch to stop the air flow.

What is supplied, what maintenance is needed and what does the warranty cover?

The kit is supplied with a roller to help finish repairs and includes PP filler strips. Packaged weight is 4.797 kg and the set comprises three pieces. The manual states there are no user serviceable parts; clean periodically with a dry cloth (do not use water or corrosive/flammable liquids). Any unauthorised intervention will void the warranty. The product carries a 12 month warranty against defects of conformity; for spare parts or service contact Power‑TEC or the distributor listed in the documentation.