1000s of products

Service + Calibration

Technical Support

GenSet 6 kVA Generator 230V/110V 3000rpm

Name: GenSet 6 kVA Generator 230V/110V 3000rpm
Brand: Wilkinson Welding
SKU: GS-PG6DY3000
Price: 4300.00 GBP
Availability: InStock

£4,300.00

Shipping calculated at checkout.

GenSet 6 kVA Generator 230V/110V 3000rpm is a professional diesel generator for workshop backup, site power and equipment support where dependable single-phase output is needed.

Key Features

6 kVA workshop power output
230V and 110V sockets
3000rpm industrial-duty engine
Suitable for trade use
Diesel-powered, lower running cost
Portable site and backup supply

Everything we sell is supported by our factory trained engineers at our premesis in Manchester or nationwide through our mobile service engineers.

Returns details can be edited in the theme editor.

Warranty

3 years

Free Delivery

UK mainland delivery

Service

In-house engineers

Support

0161 223 1843

Expert Advice

Paul Jones says

This is a compact 6 kVA generator intended for general workshop power, with both 230 V and 110 V output at 3000 rpm. In a bodyshop or fabrication environment I’d use this sort of unit for mobile repair work, running welders in the lower power range, small compressors, lighting towers, and general 230 V tools where mains supply isn’t available or reliable.

The main technical points are load management and voltage selection. At 6 kVA you need to be realistic about what you run at the same time, especially with equipment that has high start-up current like compressors or induction heaters. The 230/110 V split also means you should plan your socket usage and cable lengths to minimise voltage drop, particularly on 110 V circuits.

A common issue I see is generators being pushed continuously at near full load with poor maintenance, leading to unstable output and nuisance tripping. Used within its rating, serviced properly and matched to sensible loads, a 6 kVA 3000 rpm set is a reliable way to keep essential kit running on site or in a temporary bay.

Paul Jones, Technical Director

📄

Technical Datasheet

Download the official manufacturer datasheet for GenSet 6 kVA Generator 230V/110V 3000rpm including specifications, compatibility information and technical details.

Download GenSet 6 kVA Generator 230V/110V 3000rpm Datasheet

WHY BUY YOUR EQUIPMENT FROM US?

Our team of welding experts at BWS is ready to assist you every step of the way. Whether you have questions about specific products, need guidance on selecting the right equipment, or seek welding-related advice, our knowledgeable staff is here to help.

We also have some of the most experienced engineers in the industry who are able to offer full technical support on top of what the manufacturers offer.

Find Our More

Technical Features

6 kVA output capacity suitable for running multiple workshop tools, lighting and small welders on site.
Dual voltage generator outlets providing both 230V and 110V singlephase supply for UK site and bodyshop equipment.
3000 rpm engine speed giving compact size and relatively low weight for easier transport between jobs and work bays.
Designed as a dedicated generator rather than a full weldergenerator, ideal for powering existing MIG/TIG and workshop machinery from one unit.
Asynchronous, selfexcited alternator design (typical for this class) giving stable voltage for power tools and electronic chargers when correctly loaded.
Singlephase configuration well suited to typical bodyshop and fabrication kit that doesn’t require threephase supply.
External EECstyle sockets for straightforward connection of extension leads and site distribution boards with proper plug compatibility.
Suitable for outdoor and site use where 110V supply is required to meet safety practices for portable tools and lighting.
Robust enginedriven construction intended for continuous professional use rather than occasional domestic standby duty.
Simple analogue controls and instrumentation (voltmeter, basic panel) allowing quick status checks without complex electronics.
Compatible with typical workshop equipment support from BWS engineers for installation, servicing and fault diagnosis.
Practical choice as a central power source for remote accident repair, mobile bodyshop work or offgrid fabrication jobs.

Specification

FAQs

Is the GenSet 6 kVA Generator 230V/110V 3000rpm suitable for professional workshops and bodyshops?

Yes. A 6 kVA, 3000 rpm diesel generator with 230V and 110V outlets is well suited to professional workshops for running welders with modest auxiliary loads, bench tools, lighting and small compressors. In a bodyshop it works as a reliable power source for MIG sets, spot welders (within their input rating), battery support units and general tooling during mobile repairs or where mains supply is limited. As with any engine-driven set, plan your total load so you stay comfortably within the 6 kVA rating for continuous use.

What power outlets and voltage options does the GenSet 6 kVA provide for tools and welders?

This type of GenSet unit is specified as 6 kVA with both 230V and 110V single-phase outputs, typically via 16A or 32A industrial sockets. That makes it compatible with most UK workshop equipment such as MIG/MAG welders up to around 150–200A, power tools, lighting and small compressors on 230V, plus site tools and transformer-fed welders on 110V. Always check the nameplate current draw of your equipment to ensure it is within the socket rating and overall 6 kVA capacity.

What are the maintenance and operating considerations for workshop use?

For workshop reliability you will need regular engine servicing (oil, fuel and air filters, valve clearances as per the engine maker’s schedule), periodic checks of belts and mounts, and inspection of the alternator and sockets for heat damage or loose connections. In daily use, run the set up to temperature and avoid long-term idling with no load, as that can lead to wet stacking on diesel engines. Keep the unit in a well-ventilated area, observe exhaust routing and noise, and make sure earth bonding is correctly installed to comply with workshop safety practice. BWS engineers can advise on correct installation, load diversity and servicing intervals for bodyshops and garages.

What should I check for compatibility with my existing welders and workshop equipment?

Confirm three main points: first, that all your kit is single-phase 230V or 110V, as this generator is not intended for three-phase loads; second, that the total running load does not exceed 6 kVA, allowing headroom for start-up surges on motors and welders; and third, that your primary welder’s input current at your typical duty cycle fits within the available socket rating (usually 16A or 32A). If you are unsure, BWS can review your welder specifications and advise whether this 6 kVA GenSet is adequate or if you should step up to a higher kVA unit for heavier fabrication or continuous high-amperage welding.