FRONIUS TRANSTIG 210 DC TIG MMA MV
FRONIUS TRANSTIG 210 DC TIG MMA INVERTER 110-230V MULTIVOLTAGE
- TransTig 210 MV/np,
- THP 180 G SH ML/F/UD/Le/4m,
- TTB 220A G ML /70°/L65,
- Ground Cable 3m 250A
- Tool Case 85,
- WIG gloves Highend (size 10),
- Tungsten Electrode WC20/ø1,x175
Anti-Stick - for safe removal by the operator of a stuck stick electrode to the workpiece
Includes operating modes designed specifically for Basic, Rutile and Cellulose. The maximum electrode diameter size is 5/32” / Hot Start and Soft Start function makes it easier to ignite cellulose 6010 and basic 7018
- High impact resistance
- Integrated dust filter
- Raised feet prevent water penetration
- Designed for rough environments
- IP23 rated
DESIGNED WITH THE FUTURE IN MIND/ The new device generation is ready for future innovations. New software versions, special processes and system information can easily be applied or updated.
The new Transtig series stands for maximum energy efficiency along with lower energy consumption meaning lower energy costs./ PFC (Power Factor Correction), enables the use of extremely long power leads with lower losses and improved generator compatibility. This massively expands the operating radius for the welder./ Time ShutDown function (TSD), switches off the power supply after a user-specified time window, saving energy. This leads to the most energy-efficient use of the device.
The soft-start function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes
If a short circuit occurs that causes the electrode to stick during MMA welding, the power source is switched off immediately. This prevents the electrode from burning out.
|Welding current / Duty cycle||155A / 60%|
|Dimension / b||160mm|
|Dimension / l||435mm|