1000s of products

Service + Calibration

Technical Support

Cros Arc MMA 161S Inverter-230V

£207.00

£207.00 £0.00

Cros Arc MMA 161S Inverter-230V

Name: Cros Arc MMA 161S Inverter-230V
Brand: Weldfast
SKU: CAP1027
Price: 207.00 GBP
Availability: InStock

£207.00

£207.00 £0.00

Shipping calculated at checkout.

The Cros Arc MMA 161S Inverter-230V is a compact 230V IGBT inverter welder for professional MMA and DC lift TIG work in bodyshops and workshops.

Key Features

160A output, 230V single phase
Stable arc with IGBT inverter
Digital amperage display
VRD safety for on-site use
Suitable 1.6–3.2mm electrodes
Portable unit with carry case

Everything we sell is supported by our factory trained engineers at our premesis in Manchester or nationwide through our mobile service engineers.

Returns details can be edited in the theme editor.

Supply

230V

Warranty

2 years

Service

In-house engineers

Support

0161 223 1843

📄

Technical Datasheet

Download the official manufacturer datasheet for Cros Arc MMA 161S Inverter-230V including specifications, compatibility information and technical details.

Download Cros Arc MMA 161S Inverter-230V Datasheet

Technical Features

Latest IGBT inverter power source gives a smooth, stable MMA arc with efficient power use from a 230V singlephase supply
MMA output range of 15–160A allows light fabrication, repair and maintenance work on a wide range of material thicknesses
Dualprocess capability with MMA and DC lift TIG mode for basic scratch‑free TIG work when used with an optional TIG torch and gas
VRD (Voltage Reduction Device) improves safety on site by dropping opencircuit voltage when the set is not welding
Good lowamp performance for running smaller 1.6–2.5mm electrodes on thin section work without constant arc outages
Comfortably runs 3.2mm electrodes for structural and general repair work in typical bodyshop and workshop environments
Generatorfriendly design makes it suitable for mobile repair jobs where mains power isn’t available, provided the generator is correctly sized and stabilised
Digital amperage display gives accurate, repeatable current settings which helps when following welding procedures or job cards
Simple frontpanel controls with clear layout and easy setup, so different operators can get consistent results with minimal training
35–50mm panel sockets accept standard heavyduty MMA and TIG leads, making it easy to integrate into existing workshop lead sets
Supplied with earth return lead, clamp and 3m electrode holder lead so the machine is ready for MMA welding straight out of the case
Lightweight 8.5kg chassis with carrying handle and supplied carry case makes it practical for site work, overhead repairs and frequent vehicle moves around the workshop
Fancooled internal design helps maintain duty cycle and reliability when used for longer weld runs in professional environments
IP21 enclosure rating and robust casing suitable for typical indoor workshop conditions when used with sensible handling and storage
Compatible with optional TIG Kit 8 (CAP0011) to add a basic DC lift TIG setup for mild and stainless work on thinner sections
Can be mounted on an optional inverter trolley (CAP0216) along with gas bottle and accessories to create a compact mobile welding station
Operates from a standard 13A 230V supply (supplied with 13A plug), so it can be used in most workshops without special wiring, subject to sensible duty management
Designed for straightforward servicing and support, with spares and technical backup available through BWS engineers for longterm workshop use

WHY BUY YOUR EQUIPMENT FROM US?

Our team of welding experts at BWS is ready to assist you every step of the way. Whether you have questions about specific products, need guidance on selecting the right equipment, or seek welding-related advice, our knowledgeable staff is here to help.

We also have some of the most experienced engineers in the industry who are able to offer full technical support on top of what the manufacturers offer.

Find Our More

Specification

Input Voltage

1P-230V (+

Input Current

16A

Current Range

15-160A

Duty Cycle @ 40°C

160A @ 25%

Power Factor @ 100%

0.73

Insulation Class

IP21

Cooling

Fan

Dimensions

450 x 280 x 320mm

Weight

8.50kg

Electrode Size

1.6-3.2mm

Functions

MMA, TIG DC LIFT

Package Includes

161S inverter power source, earth return lead & clamp, 3m MMA lead, 13A plug

FAQs

What power supply does the Cros Arc MMA 161S need?

It runs from a standard single-phase 230V supply, so it is suitable for most workshops and site jobs without needing three-phase power. The machine is also generator friendly, which is useful for mobile repair work.

What electrodes can it use and what can it weld?

The machine is set up for MMA work with electrodes from 1.6 mm to 3.2 mm. In practical terms it is a compact stick welder for mild steel and stainless work, and the 160A output makes it a sensible choice for light fabrication, repair and maintenance jobs rather than heavy production welding.

Can the MMA 161S be used for TIG welding?

Yes, it has TIG DC lift capability as a function, but it is supplied as an MMA inverter and needs the correct TIG kit and torch setup if you want to use it for lift TIG work. For workshops, that makes it a flexible machine for occasional TIG use rather than a full dedicated TIG set.

What comes in the box and what should a workshop expect to buy separately?

The package includes the inverter power source, earth return lead and clamp, a 3 metre MMA lead and a 13A plug. If you need TIG capability, you would need the optional TIG kit, and a trolley is available if you want a more permanent workshop setup.