AES-JOSAM HEAT INDUCTOR - JH400
JH400 is used for sheet metal straightening and loosening of smaller machine parts such as nuts, pins and clamping rings.
- Safe heating without a flame
- Controlled heating output
- Variable Power
The JH400 is mainly used for lighter repair work. The high power induction heater can be used in the same way as a gas torch, but without destroying nearby parts. Overheating is avoided through the unique 5-step regulation and power control system. The heat is applied directly to the material being worked on without the necessity for removing heat-sensitive components nearby.
The Josam JH400 is ideal for supporting wheel alignment adjustments, the 2 tips available for the JH400 make even those hard-to-reach areas accessible. The JH400 is the only wheel alignment heat inductor you should be looking at.
|Mains supply||208-240 V, 1 Ph+PE, 50/60 Hz, 16 A|
|Degree of protection||IP 21|
|Working frequency||18-40 kHz|
|Input power||4 kW|
|Output power – induction power||3.7 kW|
|Induction cable||3 m|
|Cooling system||Water cooled (distilled)|
|Continuous operating time||20 minutes*|
|Weight||54 kg with full tank|
|Water tan||20 litres|
|Size (L×W×H)||520×360×990 mm|