Boron Spot Weld Removal Drills

Bororn spot weld removal drills cut clean holes in panel overlaps without wandering, ideal for sectioning repairs on modern vehicles with high-strength steels. Select 6mm for standard factory spots, 8mm for thicker overlaps—pair with low-speed drills to avoid work-hardening or burning coatings. These handle daily bodyshop volume reliably, clearing the way for precise MIG plugs. BWS engineers recommend genuine bits for consistent performance; stock multiples and contact us for application advice or onsite demos.

Skip to results list
Availability
Price
to
The highest price is £69.20
Clear
2 items

Filter

Availability
Price
to
The highest price is £69.20
  • Boron Spot Weld Drill Bit Ø10mm UHSS/HSS

    Boron Spot Weld Drill Bit Ø10mm UHSS/HSS

    Boron Spot Weld Drill Bit Ø10mm UHSS/HSS
    £69.20
    £69.20
  • Boron Drill Bit 10mm

    Boron Steel Spot Weld Removal Drill 8mm UHSS/HSS

    Boron Steel Spot Weld Removal Drill 8mm UHSS/HSS
    £45.31
    £45.31 £0.00

Engineer Advice

Paul Jones

Paul Jones says

Boron Spot weld drills as they are commonly know are in fact Carbide 3 fluted milling bits. You dont use a drill with the bits as the speed can blunt them extremely quickly. You need to turn you drill speed right down to max 800RPM and slowly mill out the spot weld all the while keeping the drill at 90 degrees to the panel. Our Boron drills are tried and tested in the workplace for there long life and quality

Paul Jones, Technical Director

Top brands with nationwide engineers
📞 0161 223 1843 ✉️ sales@basicwelding.co.uk
Contact Us