UV Paint Curing Lights
Engineer Advice
Jason says
These are specialised UV curing lamps designed for fast curing of UV-refinishing products in a bodyshop environment. In practice, they’re used for localised curing of UV primers, fillers and spot repairs on panels, bumpers and small components, where you want to reduce booth time and keep work moving.
In day-to-day use, the key is controlling distance, angle and exposure time so you get full cure without overheating plastics or softening adjacent paint. Different UV products cure at different rates and film builds, so matching the lamp output and working distance to the paint manufacturer’s data is important. Good cable management or battery planning also matters when you’re moving around a vehicle.
A common issue we see is operators holding the lamp too far away, assuming “near enough” is fine, then wondering why sanding clogs or adhesion is poor. The opposite problem is sitting too close on plastic, risking distortion.
Set up correctly and used with the right UV materials, these lamps are a reliable way to speed up repairs and free the spray booth for bigger jobs.
In day-to-day use, the key is controlling distance, angle and exposure time so you get full cure without overheating plastics or softening adjacent paint. Different UV products cure at different rates and film builds, so matching the lamp output and working distance to the paint manufacturer’s data is important. Good cable management or battery planning also matters when you’re moving around a vehicle.
A common issue we see is operators holding the lamp too far away, assuming “near enough” is fine, then wondering why sanding clogs or adhesion is poor. The opposite problem is sitting too close on plastic, risking distortion.
Set up correctly and used with the right UV materials, these lamps are a reliable way to speed up repairs and free the spray booth for bigger jobs.
Jason, Sales Director